About Us Subscribe Partner Portal Contact Us Customer Portal

Go
 

The PrismaPro™ Method: Video Library & Resource Hub

Dry-Apply Precision. Flawless Execution.

Welcome to the official PrismaPro™ Color Paint Protection Film learning hub. PrismaPro™ is engineered to completely transform a vehicle's aesthetic while protecting it with a 8.5 mil TPU shield. Because dry-apply TPU handles entirely differently than traditional wet PPF films or standard wrap vinyl, we built this resource hub to eliminate installation trial-and-error. Explore our video training modules, instructional bulletins, and technical data sheets below to maximize your shop’s speed, installation efficiency, and delivery quality.

Master the Material: In-Person Training Classes

Digital videos provide a phenomenal blueprint, but nothing replaces the feedback of a live vehicle under the direct guidance of an Avery Dennison trainer. If you are ready to lead your market in dry-apply color PPF, our intensive 2-day hands-on class is your essential first step.

  • What You’ll Learn: Complete surface decontamination, tool optimization, precision scoring over cap sheets without touching factory paint, and full-panel execution on hoods, roofs, trunks, fenders, and complex bumpers.
  • The Free Roll Bonus: Every attendee walks away with a complimentary full roll of PrismaPro™ to immediately monetize your new skills back at your shop.

Find a Training Class Near You

The training modules

Module 1: The Essential Tool Checklist

 

Featured Trainer: Blake Madsen

Having a premium film is only half the battle—if your pouch isn't equipped for 8.5 mil TPU, you are going to struggle in the bay. Get a complete breakdown of the essential tools required for dry-apply color PPF success, from the WrapGlove® GHOST® for handling IntelliTack™ adhesive to specialized squeegee buffers and 58-degree blades. 

Watch Video

Module 2: Installation Dos & Don'ts

 

Featured Trainer: Blake Madsen

PrismaPro™ installs dry, but working with an 8.5 mil TPU requires a completely different mindset than standard Supreme Wrapping Film™ vinyl. Learn critical rules from Blake Madsen, including why you must ditch installation magnets, how to prevent pre-tacking over large panels, and how to execute tight edge tucks without tenting.

Watch Video

Module 3: Hood Installation Mechanics

 

Featured Trainer: Nash Kirchoff

Watch Nash Kirchoff drop an entire 60" panel of PrismaPro™ completely dry, glass out the center smoothly, and execute clean relief cuts so the thick TPU film hugs vehicle corners flawlessly.

Watch Video

Module 4: Advanced Fender & Compound Curves

 

Featured Trainer: Nash Kirchoff

Deep recesses and sharp wheel flare lines will fight you if you don't read the material tension lines correctly. Watch our trainers break a complex fender down into manageable sections, apply horizontal stretch, and use controlled heat to shrink 8.5 mil color PPF into deep channels without pull-backs.

Watch Video

Module 5: Precision Cutting vs. Scoring Film

 

Featured Trainer: Nash Kirchoff

Getting your blade depth wrong on a customer's vehicle means paying for an expensive new paint job. Master the exact hand pressure and 58-degree blade angle Nash Kirchoff uses to score 8.5 mil color PPF cleanly over its protective cap sheet without ever contacting factory paint.

Watch Video

Module 6: Clean Material Removal

 

Featured Trainer: Nash Kirchoff

What goes on must eventually come off, but removing an 8.5 mil TPU shield requires the right strategy to protect original clear coats. Learn how to properly soften IntelliTack™ adhesive with heat and pull the film away at a flat angle for a fast, perfectly residue-free removal.

Watch Video